NO MESS, NO WASTE, NO CLEANUP
No need to haul out the separate cans of resin and hardener, mixing cups, stir sticks and fillers. A Thixo cartridge, mixing tip, and a caulk gun are all you need to lay down a neat, uniform, pre-mixed bead of strong, waterproof, thickened epoxy adhesive in less time and with greater accuracy.

The resin and hardener sit in separate chambers inside the cartridge. Squeeze the trigger and the resin and hardener slide into the static mixing tip where they’re blended together in a perfect 2:1 mix so Thixo comes out of the tube ready to go. Squeeze out just what you need, exactly where you need it. Use just what you need and save the rest – nothing gets wasted.

And there’s really no cleanup. Just leave the mixing tip attached and let it cure. When you’re ready to use it again, just change out the old mixing tip for a new one. For longer term storage, remove the mixing tip and toss it, then replace the Thixo cap. It’s also much easier to store onboard – or anywhere else, for that matter.
 
THICK ENOUGH NOT TO SAG OR DRIP, BUT THINS ENOUGH TO WET OUT
Thixo has excellent adhesion and its unique viscosity makes it versatile to use for projects ranging from overhead bonding and gap-filling jobs to filleting and small fiberglass boat repairs and tabbing. It’s especially easy to squirt into hard-to-reach places, too. Once Thixo cures, you can sand, paint, saw, machine, drill, tap, or file it.
 
LONG WORKING TIME, SHORT SETUP TIME, AND A PERMANENT, FLEXIBLE, WATERPROOF RESULT — EVERY TIME
At 77°F, Thixo gives you a generous 50 minutes of working time in which it remains workable inside the static mixing tip. The short 30-35 minute gel time means that once you apply it, it sets up faster so you can move on to something else. Because of the pre-blended 2:1 mix, the results are always the same – strong and resilient. Whatever you’re sealing stays sealed, whatever you’re filling stays filled, and whatever you’re gluing stays stuck.

The good news about the mixing tips is that you don’t need them for smaller jobs. You can just squeeze out what you need into a cup and mix it with a stir stick. Remember, the more thoroughly you mix epoxy, the better it will cure.
 
THIXO 2:1 ADHESIVE DETAILS
Work neatly and efficiently when gluing, bonding, filleting, tabbing, and filling gaps.
Bonds strongly to wood, fiberglass, and properly prepared metals, aluminum, fiberglass, block, brick, concrete, glass, slate, tile, stone, and more.
For use above and below the waterline.
Cured epoxy can be drilled, sanded and painted, and is 100% waterproof.
Does not sag on vertical or overhead surfaces, and pulls nicely into fillets.
Provides ample working time for longer installations.
Sets up quickly so you can move on to other projects.
Smoother to apply – not as gritty as other 2:1 epoxy adhesives.
Use as much as you need, and save the rest for the next project.
Easy to store onboard, and has a long shelf life.
Thixo epoxy cartridges fit all standard caulk guns.